Sep 12 06
Just got a call and it was about my bike. It sounded like a black female about 26ish maybe?
Anywho the conversation was only 1.45 minutes long and was cut off, the number was also blocked.
The bike was spotted within 4 miles of my house just recently but I did not get any more usefull information other then that and that her nephew? I guess knows that the people who have it said they stole the bikes?
Which I guess would be mine and another?
I dont know and I could just be going off on a wild goose chase here but im remaining optimistic and gonna go put up some flyers in the area where it was spotted with the $500 reward.
Pray for me fellas.
<hr>
UPDATE
STOLEN ON AUG 26 06
Stolen from
Fieldstone apts 14 1/2 Mile road and Schoenerr
Sterling Heights, MI
48312
Bike could even be in Ohio or other states so please keep you eye out.
Ill go ahead and point out some things you will notice in the pics before I post them up.
The battery has been relocated under the tank
The subframe was customized using all the stock subframe but I chopped it down then chopped off the support bars and relocated them.
From there I took the left over scrap and put it on a hard angle to reach the upper rear support holes in the rc51 tail.
I can jump up and down on the seat (yes I have) and it doesnt flex one bit.
The rim is a 2001 rear rim with 180 tire
The tail will have a piece of plastic that connects to the tank to hide the little bit of area where you can see the battery.
The bottom chin fairing has been custom chopped and will go back on.
The front fender is garbage so I need to buy another one but it will go on as well.
The exhaust is D&D 4-2-1
The muffler is a custom chopped d&d carbon fiber muffler
The undertail is hotbodies
https://www.hotbodiesracing.com/RC51_ut_sbk.php4
The gauges are veypor
https://www.veypor.com/veypor.html
The front bikini fairing is an endoru rage fairing
https://motorcycleproducts.co.uk/catalog ... lights-rag e-fairing-headlights-c-200_87_852_979.html
Everything you see in primer will be candy manderin orange
https://www.alsacorp.com/products/candyc ... _price.htm
I plan to make a custom gauge setup to house an aftermarket fuel gauge since the tank already has the sender and an aftermarket air/fuel ratio gauge since I already have the bung and o2 sensor, the veypor will sit in the middle of them in a custom housing and the key will be relocated.
I may add the option to add the rear seat when needed with detachable rear pegs since riding girls on my buddies 600 is starting to suck.
I now need to modify (maybe flip?) the petcock because my knee keeps hitting it (especially when comming down from a wheelie) and I already broke it off once and it wasnt pretty seeing fuel spraying everywhere at 50mph.
